SURFACE MAINTENANCE REPAIRER (T32)
As a SURFACE MAINTENANCE REPAIRER (T32), WG-5801-8, you will perform limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Make routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Perform work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. Perform limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determine when parts should be cleaned, adjusted or replaced with standard parts to complete work orders. PHYSICAL EFFORT:
Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights. WORKING CONDITIONS:
Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods. AREA OF CONSIDERATION:
This position is in the Excepted Federal Civil Service under the authority of 32 U.S.C. 709, and is open to Category 1 & 3 Only.Category 1:
All permanent/indefinite (T32 and T5) technicians employed by the agency WITH dual FL National Guard military membership; Category 3:
All current military members of the Florida National Guard. First consideration will be given to Category 1. PCS:
Permanent Change of Station (PCS) MAY be authorized. Authorization for payment of PCS expenses will be granted ONLY after determination is made that payment is in the best interest of the Florida National Guard. MILITARY GRADES:
Enlisted, E6 & Below GENERAL
Experience:
Must have experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and is able to use common tools and equipment in the line of work. SPECIALIZED
Experience:
WG-08 must have at least 12 months experience or training using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments. Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics.
Estimated Salary: $20 to $28 per hour based on qualifications.
Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights. WORKING CONDITIONS:
Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods. AREA OF CONSIDERATION:
This position is in the Excepted Federal Civil Service under the authority of 32 U.S.C. 709, and is open to Category 1 & 3 Only.Category 1:
All permanent/indefinite (T32 and T5) technicians employed by the agency WITH dual FL National Guard military membership; Category 3:
All current military members of the Florida National Guard. First consideration will be given to Category 1. PCS:
Permanent Change of Station (PCS) MAY be authorized. Authorization for payment of PCS expenses will be granted ONLY after determination is made that payment is in the best interest of the Florida National Guard. MILITARY GRADES:
Enlisted, E6 & Below GENERAL
Experience:
Must have experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and is able to use common tools and equipment in the line of work. SPECIALIZED
Experience:
WG-08 must have at least 12 months experience or training using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments. Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics.
- Department:
5801 Miscellaneous Transportation/Mobile Equipment Maintenance - Salary Range:
$22.89 to $26.70 per hour
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
